Description
Carved horn inserts with a twisted, rope-like surface, stainless bolsters, and a clip point blade with drilled openings and filed notches near the spine.
In practice: this is the most textured handle in the range, and that is deliberate. The carving is not just decoration. It gives the grip something to key into, which is the difference between confidence and caution when your hands are cold or damp.
| Overall length | 9.1 inches |
| Blade length | 4.4 inches |
| Handle length | 4.7 inches |
| Steel | High carbon steel |
| Hardness | 58–60 HRC, oil tempered |
| Handle | – Stainless Steel with ram Horn Inserts |
The carved handle
The horn has been worked into a spiral relief rather than left flat, so the surface rises and falls under your fingers along the whole length of the handle. Practically, that means the knife does not need to be squeezed to stay put. It also means the handle collects more dirt than a smooth insert would, and it wants an occasional going-over with a soft brush to clear the grooves. Horn is a natural material, so the depth of the color and the way the grain crosses the carving differs from one to the next. Expect a relative of the photograph, not a duplicate.
The blade
The profile is a clip point with a long straight run and a swept tip, finished bright with no pattern in the steel. The drilled openings take a little mass out of the forward end, which shifts the balance very slightly back toward your hand, and the filed notches along the spine give your thumb a positive place to sit when you shorten your grip for detail work. The tip is fine. It is precise and it is not strong, so keep it out of anything you would be tempted to lever.
Looking after it
The blade is bright, bare steel and it needs to stay dry. Dry it down when you are done and leave the thinnest coat of oil on it before it is stored for any length of time. If a spot ever appears, take it off with the gentlest thing that works rather than reaching for coarse abrasive, because a bright finish is easy to dull and difficult to match. The horn wants the opposite of water: brush it clean, and if it looks dry, work a little mineral oil into the carving and wipe the excess out of the grooves. The pivots take one drop of oil each.
Questions worth answering
Does the carving wear smooth? Not meaningfully. The high points polish, the grooves stay.
Is it comfortable for long sessions? More than a flat insert for most people, less than one for anyone with sensitive palms.
How is the balance? Near enough even, tipping a shade toward the handles.
If you are still deciding what you want from a carry knife, choosing an EDC knife is a sensible starting point, and honing versus sharpening explains why a rod is not a stone. For a smooth, modern handle in the same length, see the rose wood and steel bolster balisong.
Model: BMK-439
Olivia S. (verified owner) –
I’ve been collecting knives for years, and this store ranks among my favorites. The steel butterfly knife I purchased here is a shining example of craftsmanship and excellence.
Ava H. (verified owner) –
I recently added a steel butterfly knife from this shop to my collection, and it has quickly become one of my most cherished pieces. The design and quality are exceptional.
Emily S. (verified owner) –
This store is a must-visit for butterfly knife enthusiasts. The knife I received is a masterpiece in steel, and it has quickly become a cherished item in my collection.
Liam R. (verified owner) –
I’m impressed with the meticulous attention to detail on the steel butterfly knife I got from this shop. It’s not just a tool; it’s a piece of art that I’m proud to own.