Limited time sale - 25% off every knife, no code neededFree expedited shipping across the USA, no minimumBuy 2 knives, get 20% offSpend $300 and a $100 mystery knife is on usFree lifetime craftsmanship warranty on every bladeHand-forged in Memphis, Tennessee since 2009
Sale!

Bonefang Hunter Handmade Hunting Knife | Twist Damascus Steel Blade | Buffalo Bone Handle | Leather Sheath | BMK-641

Original price was: $136.00.Current price is: $102.00.

👁Viewed 2,900+ times
Save $34.00 · 25% off

Handle: White buffalo bone with a dark hardwood band
Includes: hand-stitched premium leather sheath

Hand forged in Memphis, shipped worldwideEvery knife is made in Memphis, Tennessee and posted from the same shop, to any country you order from. Expedited shipping inside the USA is free and your international rate is shown at checkout. Shipping details

Initials, a name, a date or a short message — laser-cut into the steel so this piece belongs to one person only. Placed on the blade or the handle, whichever suits the knife best.

Free expedited US shippingOn every order, no minimum
Lifetime warrantyAgainst any defect, forever
Hand-forged in MemphisMade in the USA
Free leather sheathHand-stitched, included

Want this one in a different steel, length or handle? We build these one at a time, so it costs no more to have it made the way you want it.

Build my own version

Or have a picture of something else entirely? Send us your own design — $55 refundable review deposit.

Pairs well with

++
Total:  

Description

The Bonefang Hunter is a hand-sized drop point with a twist-pattern blade and a handle built in three materials: white buffalo bone at the butt, a band of dark hardwood at the front, and a thin green spacer holding the two apart.

Steel 1095 + 15N20 Damascus, 352 layers
Handle White buffalo bone with a dark hardwood band
Hardness 58–60 HRC, oil tempered
Included Hand-stitched leather sheath

Right for: a first serious hunting knife, or a second one you are not afraid to use. The blade fills a palm and no more. There is a wide belly for skinning, a strong drop point that will not perforate a paunch, and a spine thick enough to take a baton if you ever need to split kindling with it. It arrives in a stitched leather sheath.

Twist pattern, and how it differs

Twist Damascus is made by taking a stacked billet and rotating it under heat before drawing it out. The layers spiral rather than stack flat, so grinding the bevel cuts through them at a constant angle and produces the tight, ropey figure you see running the length of this blade. It looks busier than a ladder pattern and far more organic than raindrop. On a hunting knife that has a practical side too: a heavily figured surface disguises the scuffs that a season in a sheath will hand you.

Buffalo bone

The pale scales are water buffalo bone, undyed, so the color is the natural bone tone rather than a stain that can wear. Bone is dense and cool to the touch, and it grips reasonably even when wet, though it is less forgiving than horn if you drop the knife on rock. Brass pins run through the scales along with a single mosaic pin at the rear, a small decorative pattern set in the middle of the handle. The hardwood front section takes the wear from the sheath throat, which is where a handle usually shows its age first.

Working through a season

This is a knife that will do a whole deer without needing a touch-up, provided you keep it off bone and off gravel. Where owners get into trouble is after dark: the knife goes back in the sheath still bloody, the leather holds the moisture against the steel, and by the weekend there are spots.

Care. Rinse the blade in clean water while it is still fresh, dry it thoroughly, and oil it before it goes anywhere near the sheath. Store the two separately over the off-season. Buffalo bone needs no feeding and dislikes being soaked; wipe it and let it dry at room temperature rather than near a heater, which can make bone crack along its length. The green spacer is a synthetic and needs nothing. If you catch a rust spot early, a light rub with oil and a cork lifts it before it pits.

Buyers ask

Does a Damascus hunter actually rust? It does, being high carbon. The detail is in do Damascus knives rust.

Is this the right size for field dressing? Yes. Our Damascus hunting knife guide works through blade length.

Is there a colored bone version? The Blue Phantom in dyed buffalo bone is the same idea with the color turned up.

Model: BMK-641

Additional information

Handle Material

White buffalo bone with a dark hardwood band

Blade Steel

1095 + 15N20 Damascus, 352 layers

Reviews

There are no reviews yet.

Be the first to review “Bonefang Hunter Handmade Hunting Knife | Twist Damascus Steel Blade | Buffalo Bone Handle | Leather Sheath | BMK-641”

Your email address will not be published. Required fields are marked *

Good quality.The product is firmly packed.Good service.Very well worth the money.Very fast delivery.

Accepted payment options VisaVISA Mastercard American ExpressAMEX DiscoverDISCOVER Google PayPay Apple PayPay